<Select Drawer>
You can set how the machine prints documents when there is no paper matching the size of the received
document.
<Switch A>
<Off>
<On>
<Switch B>
<Off>
<On>
<Switch C>
<Off>
<On>
<Switch D>
<Off>
<On>
<Menu>
<Function Settings>
Drawer>
Specify the setting item
<ECM RX>
Enable or disable error correction mode (ECM). ECM checks for fax data errors and corrects them. To reduce
errors on sent faxes, see
<Off>
<On>
<Menu>
<Function Settings>
●
ECM must be enabled on both the machine and the other fax device because error check is
performed on both the sending and receiving devices.
●
Even when ECM is enabled, errors may occur due to telephone line conditions.
●
It may take a longer time than usual to process data when ECM is enabled because the error check
and corrections are performed while the data is transmitted.
Setting Menu List
<Receive/Forward>
<Apply>
<ECM TX>(P. 546) .
<Receive/Forward>
554
<Fax Settings>
<Select
<Fax Settings>
<ECM RX>
<On>