Table of Contents
Advertisement
The answering machine activates, enabling the caller to leave a message. If you pick up the
handset before the answering machine starts recording a message, you can talk with the
caller.
The machine distinguishes between fax and telephone calls. This mode is only available for
<Net Switch>
certain countries and requires subscription to a network switch service.
●
Depending on the type of telephone connected to it, the machine may not be able to send or receive faxes
properly.
●
If you are connecting an external telephone with fax functions, set the telephone to not receive faxes
automatically.
●
If you pick up the telephone handset and hear a beep, the call is a fax. You can receive the fax just by using
the telephone to enter a specific ID number.
(P. 232)
◼
Setting Up the Machine to Receive Faxes
1
Select <Fax> in the Home screen.
●
When the login screen appears, enter your user name and password and set up the authentication server.
Logging in to Authorized Send(P. 127)
2
Select <RX Mode> in the <TX/RX Settings> tab of the Fax Basic Features screen.
Basic Features Screen(P. 220)
3
Select the receiving method.
When selecting <Fax/Tel (Auto Switch)>
Specify the following three settings as necessary. When the setting is complete, select <Apply>.
●
You need to connect your answering machine to the machine beforehand.
●
Set the answering machine to answer after a few rings.
●
We recommend that you add approximately 4 seconds of silence at the beginning of the
message or set the maximum recording time to 20 seconds.
●
You need to connect your telephone to the machine beforehand.
Faxing
Using a Telephone to Receive Faxes (Remote Reception)
Home Screen(P. 116)
231
Fax
Advertisement
Table of Contents
