<Enable>
<Menu>
<Function Settings>
<Enable> or <Disable>
●
To enable the BarDIMM menu, it is necessary to activate the Barcode Printing Kit. When you are not
printing bar codes, make sure to disable the BarDIMM menu. Otherwise, the processing speed of
regular print jobs may be reduced.
●
The default setting is <Disable>. If you activate the Barcode Printing Kit, it changes to <Enable>.
<FreeScape>
Specify the AEC (Alternate Escape Code) to be used for bar code commands when the host computer does
not support the standard Escape Code.
<Off>
<~>
<">
<#>
<$>
</>
<\>
<?>
<{>
<}>
<|>
<Menu>
<Function Settings>
an escape code
●
This setting is available only when <BarDIMM> is enabled.
*1
<PS>
Specify the PS printing settings such as page layout and print quality.
<Job Timeout>
This setting enables you to specify the amount of time before a job times out. If a job has not finished within
the set time limit, the job automatically cancels.
Setting Menu List
<Printer>
<Printer Settings>
<Printer>
<Printer Settings>
517
<PCL>
<BarDIMM>
Select
<PCL>
<FreeScape>
Select