Table of Contents
Advertisement
<Black & White>
Copies in black (K) only, regardless of the color of the original.
●
Originals with colors close to black, originals with light colors, or originals with small color areas may
be detected as black and white originals, even if you set <Auto (Color/B&W)>.
Adjusting Density
◼
Adjusting Entire Density
<Other Settings>
◼
Adjusting the Background Density
<Other Settings>
background density
●
Depending on the original color, portions other than the background may be affected.
●
If you select <Density by Color>, you can adjust the background density for each color.
Copying
Adjust the density of the scan if the text or images in an original are excessively light
or dark. For example, you can sharpen text and lines written using a pencil.
Adjusting Entire Density(P. 194)
Adjust the background density. You can make a clear copy of originals with colored
backgrounds, or originals such as a newspaper that is printed on thin paper on
which text or images on the other side are visible through the paper.
the Background Density(P. 194)
<Density>
Adjust the density
<Density>
<Adjust Background Density>
<Apply>
194
<Apply>
<Adjust (Manual)>
Adjusting
Adjust the
Advertisement
Table of Contents
