Table of Contents
Advertisement
●
Make sure that there is enough air between each sheet of paper.
4
Load the paper.
Make sure that the paper size setting of the paper drawer matches the size of the paper to load in
the paper drawer.
Load the paper stack with the print side face up, and against the side wall of the paper drawer.
Paper drawer 1
Do not exceed the load limit line when loading paper
●
Make sure that the paper stack does not exceed the load limit line. Loading too much paper can cause
paper jams.
Paper (excluding envelopes):
Envelopes:
●
If you use paper with a logo mark, pay attention to the orientation when loading it in the paper source.
Loading Preprinted Paper(P. 148)
●
When placing envelopes, pay attention to the orientation and the preparations before placing envelopes.
Loading Envelopes(P. 141)
●
For paper that can be loaded in each paper drawer, see
●
If there are instructions on the paper package about which side of the paper to load, follow those
instructions.
●
Paper may overlap when it is fed or a paper jam may occur, depending on the cut surface of the paper.
Changing the paper orientation and loading it again may reduce the effect of the cut surface.
●
If paper runs out and printing is stopped, load a new paper stack. Printing restarts after the new paper
stack is loaded.
5
Gently insert the paper drawer into the machine.
Basic Operations
Paper drawer 2
Specifications(P. 714)
137
Advertisement
Table of Contents
