Table of Contents
Advertisement
Cannot send because more than one destination is specified.
Sending a fax to multiple destinations is disabled.
●
To specify multiple destinations, you need to set <Restrict Sequential Broadcast> to <Off>. For more
information, contact your Administrator.
Restricting Sequential Broadcasts(P. 417)
Cannot specify group destinations, or multiple destinations at the same
time.
You specified multiple destinations or Group Dial after selecting <Hook>.
●
After you select <Hook>, you cannot specify multiple destinations or Group Dial. Specify destinations
without selecting <Hook>, and send fax documents.
Cannot specify group destinations when on-hook.
Group Dial was specified as a destination after selecting <Hook>.
●
Once you select <Hook>, you cannot specify destinations in Group Dial. Specify destinations to send fax
documents without selecting <Hook>.
Cannot use these settings. Sending to the specified destination is restricted.
The machine is set up so that the user currently logged in cannot send to the addresses registered in the
selected <Favorite Settings>.
●
Change the send restrictions for the logged in user.
Setting the Department ID Management(P. 364)
Cartridge Communication Error A counterfeit or non-Canon cartridge may be
in use.
A toner cartridge may not be installed correctly or may be faulty.
●
Re-install the toner cartridge. If re-installing the toner cartridge fails to clear the error message, the toner
cartridge may be faulty. Contact the store where you purchased the toner cartridge or consult the Canon
Customer Help Center.
The toner cartridge used may not be a genuine Canon product.
●
Only genuine Canon toner cartridges should be used as replacement toner cartridges.
Consumables(P. 632)
Troubleshooting
Procedure for Replacing the Toner Cartridge(P. 597)
656
Advertisement
Table of Contents
