Charging the Scanner Handle
Batteries
To charge the batteries in the scanner handle:
1. Unscrew the two quarter-turn screws securing the
handle to the hand-held computer. Remove the hand-
held computer.
2. Slide the handle into the charger by inserting the keys
of the handle into the notches in the charger. The
single unit charger's LED illuminates green when the
battery pack is fully charged.
1. Charger
2. Notch outs in battery pack charger cup
Inserting Scanner Handle Into Charger
R
PEN*KEY
Model 6400 Hand-Held Computer User's Guide
SECTION 2
2
Figure 2-9
Operation
"
1
2-21