Screen Mode - Intermec PEN*KEY 6400 User Manual

SECTION 3
To change the screen size:
1. Press the arrow keys. Each key press moves the word
On one position in the direction of the arrow key
pressed. The word On indicates the current setting
(the setting above is 18 rows with 20 characters per
line—the word On is in the row 18, column 20).
2. When the word ON appears in the position corre-
sponding to the desired screen size, press the [ENT]
key.

Screen Mode

Use Screen Mode to select cursor position and movement as
you scroll through data in the display buffer. This buffer
stores data in a standard CRT format (as sent from the host
computer). Since your hand-held computer display is small-
er than a CRT, these Screen Mode options allow you to opti-
mize your view of information (data) on the hand-held com-
puter display.
In order to see all of the data on the screen, use the arrow
keys to scroll (or "move") the view port of the screen on the
display.
1) Center Cursor
2) Corner Mode
3) Page Mode
4) Lazy Mode
5) Locked Mode
Center Cursor is the default mode. In this mode, the cur-
sor begins near the center of the display and attempts to
remain there as you scroll through the data. Upon reaching
an outside boundary of the full CRT screen, the display
stops advancing while the cursor moves beyond the center
R
PEN*KEY Model 6400 Hand-Held Computer User's Guide
Terminal Emulation Menu Screens
"
Screen Mode
3-39