Cleaning Your Hand-Held Computer - Intermec PEN*KEY 6400 User Manual

Cleaning Your Hand-Held Computer

Periodic cleaning helps maintain the appearance and reli-
ability of your computer. When cleaning your computer, in-
spect the keyboard, covers, display, connectors, and periph-
eral products for obvious signs of damage or wear.
B CAUTION:
Do not use any abrasive cleaning compounds, ketonic solvents
(acetone or ketone) or aromatic solvents (toluene or xylene) to
clean any part of your computer. These solutions cause
permanent damage to your computer.
Never pour cleaners directly on the display nor the case.
Instead put the cleanser on a soft cloth and gently wipe the
case.
Case and Display
Norand Corporation recommends cleaning the exterior of
your computer using a soft cloth dampened with:
"
"
Docking Connectors
If the docking connector contacts become dirty or tarnished,
clean them with a cotton swab dipped in isopropyl (and not
ethyl) alcohol. It may also be necessary to lightly burnish
them with a pencil eraser.
SECTION 4
MICRO-CLEAN II cleanser, made by Foresight In-
ternational, Inc. 4887 F Street, Omaha, NE
68127-0205, telephone 1-800-637-1344
Glass cleaner or isopropyl alcohol
R
PEN*KEY Model 6400 Hand-Held Computer User's Guide
Maintenance and Troubleshooting
"
4-3