Intermec PEN*KEY 6400 User Manual page 168

The three digit number ("289") indicates the specific proto-
col error. These error codes apply when COMM SETTINGS
is set to NPCP RS-485 or NPCP RS-232:
"
" NOTE:
The following values indicate an error returned by MININET.EXE.
100 is added to the error returned by MININET.EXE to avoid conflict
with other defined errors.
APPENDIX B
"0"
No error
"1"
MININET.EXE not installed
"6" User aborted communications by pressing
[- -]
"11" Invalid parameter specified in control file
"101" Illegal buffer length
"103" Invalid command
"105" Command timed out
"106" Message incomplete
"108"
Illegal local session number
"109"
No resource available
"110" Session closed
"111" Command canceled
"113" Duplicate name in local name table
"114" Name table is full
"115" Name is deregistered, command complete
"117" Local session table full
"118" Session open rejected
"119"
Invalid name number
"120"
No answer
"121" Name not found
"122" Name in use on remote adapter
"123" Name deleted
"124" Session ended abnormally
"125" Name conflict
"126"
Incompatible remote device
"133"
Network interface is busy
"134"
Too many commands outstanding
"135"
Invalid LAN adapter number
"136" Command completed while cancel occurring
R
PEN*KEY Model 6400 Hand-Held Computer User's Guide
R
NORAND Utilities Program
"
B-11