Radio Comm - Intermec PEN*KEY 6400 User Manual

Cursor Mode
The Cursor Mode menu allows you to select the cursor
style.
"
"
"
After making your selection, press the [ENT] key. You then
return to the Display Opts menu.

Radio Comm

This menu allows you to enable or disable SST diagnostic
mode.
" NOTE:
Diagnostic modes disable data compression and are reserved for
engineering tests.
SECTION 3
Cursor Mode
1) Underline Blink
2) Block Blink
3) Underline
4) Block
> <
Cursor location in the Block mode is indicated by a re-
verse video (highlighted) block (J) character.
Blink modes causes the cursor to appear and disap-
pear in its current location. Blinking cursor only
works using the 16 line by 20 column font setting or
18 x 20 depending on the size of display you have se-
lected on your computer.
The cursor shape is displayed between '>' and '<'.
R
PEN*KEY Model 6400 Hand-Held Computer User's Guide
Terminal Emulation Menu Screens
"
3-35