Keyboard Test - Intermec PEN*KEY 6400 User Manual

SECTION 3 Terminal Emulation Menu Screens
"

Keyboard Test

The Keyboard Test lets you test each key on the hand-held
computer keyboard. The Keyboard Test screen is shown
below:
To perform this test, press each key on the keyboard (except
the [ENT] key). A character corresponding to the key
pressed should appear on the display.
Scanner Test
The Scanner Test allows you to test the operation of an
attached bar code scanner. From the Scanner Test menu,
scan an enabled bar code. For this test to pass the bar code
and the bar code length should appear on the display. Press
any key to exit.
The Scanner Test screen is shown below.
R
3-48 PEN*KEY Model 6400 Hand-Held Computer User's Guide
Keyboard Test
Press a key
ENTER To Exit
Key =
'A'
Scanner Test
Scan Code>
Length>