Intermec PEN*KEY 6400 User Manual page 112

SECTION 3
1) Host View Sze
2) Data Stream
3) Extended Cmds
4) 5250
5) 3270
6) VT220
7) Native
Host View Size
The Host View Size option tells the hand-held computer the
format of display information sent from the host. The dis-
play viewing size equals 1920 (determined by taking the
number of rows times the number of columns). The excep-
tion is with 5250 Terminal Emulation which can have an
additional row for error messages and therefore can have
2000 characters instead of 1920.
The default setting for Native Terminal Emulation is 120
columns by 16 rows (equals 1920). The default for VT220
Terminal Emulation is 80 columns by 24 rows (equals
1920). The default for 5250 Terminal Emulation is 80 col-
umns by 24 rows (25 with error messages).
The default for 3270 Terminal Emulation depends on what
the original setting was before you changed to 3270 Termi-
nal Emulation. Remember that the total characters must
equal 1920 (number of rows by the number of columns) un-
less using 5250 Terminal Emulation with error messages.
Host View Sze
To change the width, enter a number (between 1 -- 80).
Press [ENT]. and return to the Protocol Opts menu.
R
PEN*KEY Model 6400 Hand-Held Computer User's Guide
Terminal Emulation Menu Screens
"
Protocol Opts
Width
xx
3-25