Intermec PEN*KEY 6400 User Manual page 100

SECTION 3
Radio #
Use the Radio # menu to set, view, or change the hand-held
computer identification number. This number allows the
host computer to identify individual hand-held computers
in the radio data network. Each hand-held computer must
have a unique number in the same network.
The Set Radio # and the Advanced Setup menus, are shown
on the following pages.
To set or change the hand-held computer identification
number, use the numeric keys on the hand-held computer
keyboard. After entering a number (between 0 and 126),
press the [ENT] key to return to the Main Menu, or the [A]
key to go to the Advanced Setup menus.
The LAN ID number can be 0--255 depending on the radio
you are using. With the RM60/70 radio the number can be
0--255 and with the RM80/90 radio the range is 0--15. Your
computer only communicates with equipment using the
same ID number that you assigned to your LAN.
If you enter a LAN ID number that is different from what is
configured in your NET.CFG file you get this message.
LAN ID changed
Need to reboot
to take effect.
If this happens the system modifies your net.cfg file which
is used by the WTPPKT.EXE program on initialization of
your computer. Therefore, that is why you need to reboot
your computer.
R
PEN*KEY Model 6400 Hand-Held Computer User's Guide
Terminal Emulation Menu Screens
"
3-13