Option 4 Modem Parameters - Intermec PEN*KEY 6400 User Manual

APPENDIX B NORAND
"
NETWORK PARAMETERS with NOVELL NETWARE
If you select this option and Option 2. COMM SETTINGS
is set to NOVELL NETWARE, this frame type drop-down
list appears:
Press the number of a frame type, or press the Y or B keys
to scroll through the list and press the [ENT] key to enter.
Press the [- -] key to exit this drop-down list without chang-
ing the frame type.

Option 4 MODEM PARAMETERS

Modem Parameters appears as Option 4 when Option 2.
COMM SETTINGS is set to MODEM/DIRECT.
If you select this option, the Modem Parameters pop-up
menu appears.
Press the number of a modem parameters option, or press
the Y or B keys to scroll through the list, then press the
[ENT] button to enter.
R
B-20 PEN*KEY Model 6400 Hand-Held Computer User's Guide
R
Utilities Program
1. 802.2
2. ETHERNET II
3. 802.3 RAW
4. 802.2 W/ SNAP
MODEM PARAMETERS
1. MODEM TYPE
NM2400/NM2400A
2. PROTOCOL
3. BPS RATE
4. DATA FORMAT
5. AUTO ANSWER
TTY
2400
8N1
--
[- -]DONE