Specifications; General Specifications; Lcd Display; Tablet - Wacom DTU-710 Safety Instructions

Specifications
General Specifications
Physical dimensions (WxDxH):
Weight:
Main Unit input Voltage:
Power consumption:
Operating temp. & humidity:
Storage temp. & humidity:

LCD Display

Display:
Screen size:
Resolution (75Hz Max.)
Pixel pitch:
Color depth:
Signal Inputs:
Refresh Rate
Plug and Play
On a TFT liquid crystal display, a very small number of pixels may be permanently illuminated or not illuminated
at all. This does not mean that the display is defective.

Tablet

Reading technology:
Active area:
Resolution:
Accuracy:
Maximum reading height:
Maximum report rate:
Pressure levels:
Communication interface:
DTU-710_EN.indd 23
418x362x57mm (excluding the stand)
5.8kg (including the stand)
DC12V
45W or less (DC12V)
5 to 35 deg. C, 80%RH (non condensing)
10 to 60deg. C, 90%RH (non condensing) (maximum
storage humidity is 38% at 60 deg.C, and maximum storage
temperature is 42 deg. C at 90% humidity)
a-Si TFT active matrix LCD
17 in
1280x1024 pixels (SXGA), 1024x768 pixels (XGA),
800x600 pixels (SVGA), 640x480 pixels (VGA)
0.264(W) x 0.264(H)mm
253 levels: 16,190,000 colors (24 bit)
Analog RGB / Digital signals (DVI 1.0)
Synchronous frequency: Horizontal 30 to 65kHz, Vertical 50
to 75Hz
All scan modes are non-interlaced.
50 to 75Hz
DDC2B
Electromagnetic reasonance method
337.9 x 270.3mm
20 lpmm (0.05mm) max.
+/-0.5mm, four corners ( 7 mm wide, 25 mm long from
each corner of four "L" shaped areas) to be +/-1.0mm
5mm
205 points/sec., max
512 levels
USB or RS-232C serial
23
04.7.20 8:32:53 PM