Rear View - Wacom DTU-710 Safety Instructions

Rear View

IMPOTANT
Be sure to adjust the tilt angle of the stand to the low tilt position before packaging DTU-710. If you do
not close the stand, the notched mechanism may be damaged during transportation and storage. Do not
lift the unit by the stand; this may damage the stand mechanism. When lifting or moving the unit, always
do so by grasping the main body casing.
DTU-710_EN.indd 11
Stand Adjustment Lever
Pull this lever to adjust the stand.
Release the lever to lock the stand in
Connector Panel Cover
To remove, slide it to the right.
CAUTION
Be careful to avoid catching your
finger in the gap of the movable
portion of the stand.
Stand
The stand can be used to adjust the
tilt angle of the unit from low (16°
from horizontal) to high (72° from
horizontal).
11
04.7.20 8:31:55 PM