System expansions
Installing and removing the hard disk
►
Open the casing (see "Opening the casing").
Removing the hard disk
1
2
►
Pull the data and power supply cable off the hard disk.
►
Use one hand to press the two ends (1) of the EasyChange rails together and use the other
hand to push the hard disk drive out.
►
If you do not want to install a new hard disk, keep the EasyChange rails for a future installation.
►
Close the casing (see "Closing the casing").
48
1
►
Release the die EasyChange rails from
the hard disk.
A26361-K1009-Z120-1-7619, edition 4