Operation
Indicators provided by the device
The indicators are on the front of the casing. Which indicators are available on your device depends
on the configuration level you have selected.
1 =
Power-on indicator
2 =
Hard disk indicator
1 - Power-on indicator
–
The indicator is green:
The device is on.
i
–
Indicator lights up orange or flashes green (depending on the type of device):
Device is in power-saving mode. After being switched on with the power button, the
device will either switch on or return to the state it was in before the energy-saving mode.
In an energy-saving mode the device must not be switched off with the main switch
!
or disconnected from the mains supply, as this may result in data loss.
–
The indicator does not light up:
The device is switched off (main switch at 0 or disconnected from the power supply) or
ready-to-operate. If your device is ready-to-operate it can be enabled with the ON/OFF
switch.
2 - Hard disk indicator
The indicator lights up when the hard disk of the device is accessed.
3 - DVD indicator
The indicator lights up when the DVD drive in the device is being accessed. Never remove the DVD
while the indicator is lit.
4 - SmartCard reader indicator (optional)
The indicator lights up if a SmartCard is inserted.
The indicator flashes if no SmartCard is inserted.
18
The display can also light up green if the device has been switched off by
holding the ON/OFF switch (see "Fehler! Kein gültiges Resultat für
Tabelle.").
1
2
3
4
3 =
SmartCard reader indicator
4 =
DVD indicator
A26361-K1009-Z120-1-7619, edition 4