System expansions
Installing and removing a WLAN module (optional)
You can also install a WLAN module for wireless LAN (Local Area Network) in the bay of the hinged
open drive cage.
Installing WLAN module
►
Open the casing (see "Opening the casing").
►
Fold up the drive cage (see "Opening the drive cage").
►
Slide the WLAN module carefully into the bay provided for it and secure it with the two
screws (1).
i
Make sure that you do not scratch the antenna on the front opening of the drive cage.
►
Connect the USB cable (2) to the WLAN module.
►
Connect the USB cable of the WLAN module onto the appropriate connector on the main
board. See manual for the mainboard.
►
Fold down the drive cage (see "Closing the drive cage").
►
Close the casing (see "Closing the casing").
Details on using Wireless LAN can be found in the online help system included with the
i
Wireless LAN software.
54
1
1
2
A26361-K1009-Z120-1-7619, edition 4