Operation; Switching The Device On; Switching Off The Device - Fujitsu Siemens Computers Esprimo C Operating Manual

Operation

Switching the device on

► If necessary, switch the monitor on (see the operating manual for the monitor).
► Switch the device ready-to-use with the main power switch on the rear panel of the device.
► Press the ON/OFF switch on the front of the device.
The power-on indicator lights green and the device is started.

Switching off the device

► Shut down the operating system properly. In Windows: from the Start menu select the Shut
Down option.
► If the operating system does not automatically switch the device into an energy-saving mode or
switch it off, press the ON/OFF switch.
The device then consumes a minimum amount of energy.
► Switch the device off at the main switch.
The device no longer uses any power.
The main switch and the ON/OFF switch do not disconnect the device from the mains
!
voltage. To completely disconnect the mains voltage, remove the power plug from the
socket.
► If necessary, switch the monitor off (see the operating manual for the monitor).
A26361-K1009-Z120-1-7619, edition 4 17