Table of Contents
Advertisement
6. The new numbering range will be displayed.
Media Bay Module Configuration
When you have obtained the Media Bay Modules and determined their
locations in either the main or expansion units, the Telephony Resources
configuration can be performed.
Note: A keycode is required to enable the expansion unit.
1. Launch Element Manager and connect to your BCM.
2. In the Configuration tab, open the Resources folder and click on
Telephony Resources.
3. The Main MBM 1 location is configured as a DSM32/DSM32+ MBM, as
most installations will use this MBM. If you are installing a pure IP-
Phone system, you may wish to Deconfigure MBM1.
NN40010-317 Issue 1.2 BCM450 Rls 6.0
BCM450 System Start Up
47
Advertisement
Table of Contents
