Physical Connection To The Bcm; Testing The Ip Connection Using Ping - Avaya BCM450 Rls 6.0 Task Based Manual

BCM450 System Start Up

Physical Connection to the BCM

The BCM OAM port can accommodate either a patch cable or a cross-over
cable.
One end of the cable is connected to the PC network card, the other end to
the OAM port of the BCM.

Testing the IP connection using Ping

When a physical connection has been made, you should next test the
connection by "pinging" the BCM. This test is performed on the Laptop/PC
that is connected to the BCM.
1. Go to the Start button on your Windows desktop, and select Run.
NN40010-317 Issue 1.2 BCM450 Rls 6.0 11