Pre-Configuration Of Keys; Push-To-Talk - Avaya J139 Using Manual

Procedure
1. Do one of the following:
• Lift the handset.
• Press Speaker.
• Press Headset.
2. (Optional) If you use the handset, press End Call to cancel dialing.
3. On the Phone screen, scroll to the required multicast page group, and press Select.
The phone displays the Paging <group name> box.
4. To end the multicast page, do one of the following:
• Press End Call.
• If you use the handset as an audio device, hang up.

Pre-configuration of keys

With the Pre-configuration of keys feature, the Phone screen displays a pre-determined set of
phone keys for accessing features, applications, and line appearances. Using this feature, you can
add and access BLF lines and auto-dialing phone extensions.
Your system administrator does the phone key configuration. If pre-configured keys are forced,
you cannot customize the mapping and labels.
If pre-configured keys are not forced, you can change their mapping and labels as required.
The forced keys have a priority over customizable keys. This does not apply to Call Appearance,
Shared Call Appearance and Busy Lamp Field keys as they are not dropped but moved to a
different location.
Contact your system administrator if you need to replace, move, or relabel the forced keys.

Push-To-Talk

With the Push-To-Talk feature, you can call another user and have your call answered
automatically.
Note:
You can make only audio calls with this feature.
December 2021 Using Avaya J139 SIP IP Phone in Open SIP
Comments on this document? infodev@avaya.com
Pre-configuration of keys
85