System Start Up; Overview; Required Information; Standalone - Avaya BCM450 Rls 6.0 Task Based Manual

BCM450 System Start Up

System Start Up

Overview

This guide details the steps required to set the BCM to a basic working state.
When the procedures described in this document have been applied the BCM
will be able to perform basic call operations, and the system will then be ready
for further configuration such as Telephony Services, Call Centre, etc.
It is assumed that the BCM has been installed and connected to a power
supply before starting this guide.

Required Information

Obtain the following parameter values from the customer's network
administrator. The information required depends on what type of network the
BCM is to be installed in.

Standalone

In this situation, the BCM is connected directly to a PC.
The required information for this situation would be:
 BCM System ID
 BCM Name
 Telephony Region
 Time Zone
 Time Source
 DHCP On/Off?
6 NN40010-317 Issue 1.2 BCM450 Rls 6.0