Adding A Person On Hold To A Conference Call; Putting A Conference Call On Hold; Dropping The Last Participant From A Conference Call; Viewing The Details For A Conference - Avaya J169 User Manual

Call Operation
The phone puts the second call on hold.
1
2. Dial the phone number, or call the person from the contacts list or from the history list.
2
3. Press the Join softkey.
3
4. To add another person, press Add and repeat steps 3 and 4.
4
5

Adding a person on hold to a conference call

6
Procedure
7
1. From the Phone screen, select your active call.
8
2. Tap/Press Conf or Add if you are already in a conference.
9
3. Select the call on hold that you want to add to the conference.
10
4. Tap/Press Resume to take the call off hold.
11
5. Tap/PressJoin or Conf to add the person to the conference call.
12
13

Putting a conference call on hold

14
Procedure
15
1. Press Hold during a conference call.
16
2. Press Resume or OK or select the call appearance to resume the conference call.
17
18

Dropping the last participant from a conference call

19
About this task
20
Use the following procedure to drop the last participant added to the conference call. Once you drop
21
the last added participant, you cannot use the procedure to drop other participants. The deskphone
22
plays an error tone if you try to use the drop method again. If you add another participant after
23
dropping the last added participant, you can use the drop method again to drop this participant.
24
Procedure
25
1. From the Phone screen, select your active call.
26
2. Press Drop once the conference is up.
27
The deskphone drops the last added person from the conference.
28
29

Viewing the details for a conference

30
31
October 2017
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
Using Avaya J169 / J179 IP Phones SIP
DRAFT—October 27, 2017—11:10 AM (UTC)
32