Chapter 10: Conference Calls; Adding A Person To An Active Call; Adding A Person On Hold To A Conference Call - Avaya Cloud Office J159 Manual

Chapter 10: Conference calls

Adding a person to an active call

About this task
You can add a maximum of two participants to an active call to set up a conference call.
Before you begin
Start a call.
Procedure
1. During a call, on the Phone screen, press Conference button or press More > Conf.
The phone puts the existing call on hold.
2. To make a call to a participant, do one of the following:
• Dial the phone extension by using the dial pad.
• Call the person from the Contacts list or the Recents list.
• Redial the last dialed number by using the Redial button.
• Highlight the extension on the phone screen, and press Conference button.
3. When the third participant answers the call, press the Join soft key or press Conference
button.
4. To add another person, press Add and repeat Steps 2 and 3.

Adding a person on hold to a conference call

About this task
You can add a held call to a conference call.
Procedure
1. On the Phone screen, select your active call.
2. Press Conf or Add or Conference button if you are already in a conference.
3. Press Held Call soft key to see a list of held calls.
July 2020 Using Avaya J159 IP Phone in an Avaya Cloud Office
Comments on this document? infodev@avaya.com
™
35