Adding A Person To An Active Call; Adding A Person On Hold To A Conference Call; Dropping A Person From A Conference Call - Avaya J189 Using Manual

Call operations

Adding a person to an active call

About this task
Use this procedure to add participants to an active call to set up a conference call.
Before you begin
Start a call.
Procedure
1. During a call, on the Phone screen, press Conf soft key .
The phone puts the existing call on hold.
2. To make a call to a participant, do one of the following:
• Dial the phone number by using the dial pad.
• Call the person from the Contacts list or the Recents list.
• Redial the last dialed number by using the Redial softkey .
3. When the third participant answers the call, press the Join softkey.
4. To add another person, press Add and repeat Step 2 and 3.

Adding a person on hold to a conference call

About this task
Use this task to add a person that you have put on hold to a conference call.
Procedure
1. During an active call, press Hold.
2. When the second person answers the call, press the Conf softkey and select the line key
of the person on hold.
The person on hold is added to the conference call.

Dropping a person from a conference call

About this task
This feature is not available on all systems.
Procedure
1. From the Phone screen, select your active conference call.
2. Press Details.
April 2022 Using Avaya J189 IP Phone H.323
Comments on this document? infodev@avaya.com
36