Making An Auto Intercom Call; Initiating A Group Page - Avaya J169 User Manual

Call Operation
2. Press the More softkey twice and then press the Exchange
1
3. To copy a contact from the Exchange server to the contacts list, press +Local.
2
4. On the Contact Edit screen, specify the name, telephone numbers, and telephone types for
3
the contact.
4
5. Press Save.
5

Making an auto intercom call

6
About this task
7
Use the Auto-Intercom feature to call a specific extension or intercom group.
8
Procedure
9
1. Before dialing, scroll right from the Phone screen to access the Features screen.
10
2. If necessary, scroll down to Auto Icom and press OK or just press the corresponding line
11
button.
12
Two numbers display with the Auto Icom feature, for example "Auto icom 2 3". The first
13
number denotes the intercom group number for the Dial Intercom feature. The next number
14
denotes the extension your administrator has predefined as your automatic intercom
15
destination extension.
16
3. Press the number(s) that corresponds to the destination extension.
17
4. Press Enter or OK to activate the intercom call to that extension, where the call appearance
18
identifies the incoming call with your name followed by ICOM.
19

Initiating a group page

20
Procedure
21
1. Dial the group pilot number.
22
The extensions in the group that you are calling auto answer the page.
23
2. Wait for seven seconds before you speak as the deskphone requires that time to allow audio
24
path.
25
3. Press End Call to stop paging.
26
Related links
27
Calling someone in your intercom group
28
October 2017
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
on page 39
Using Avaya J169 / J179 IP Phones SIP
DRAFT—October 27, 2017—11:10 AM (UTC)
or softkey.
38