Config Firmware - D-Link DGS-3100 SERIES Cli Manual

Example usage:
To display the current state of the auto update feature:

config firmware

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To specify the system image:
show firmware information
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the active system image file:
DGS3100# show dhcp_auto
Dhcp auto update status: Disable
DGS3100#
To specify the system image that the device will load at reboot.
config firmware {unit <unit_id 1-6>} image_id <init 1-2>
The config firmware command specifies the system image that the
device loads at startup.
−
Specifies the unit ID number. (Range:
unit
−
Specifies the system image ID number.
Image_id
None.
DGS3100# config firmware unit 1 image_id 1
Success
DGS3100#
To
display the active system image file loaded by the device
show firmware information
show firmware information
The
stored image files, and indicates those that are currently active.
None
None.
DGS3100# show firmware information
Unit Image Version
---- ---------- ----------
1 1 1.ep.58
1 *2 2.00.10
4 1 1.ep.58
4 *2 2.00.10
5 1 1.ep.58
5 *2 2.00.10
DGS3100#
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
command
Update Time
-------------------
28-Nov-2007 19:22:43
20-Nov-2007 15:21:24
28-Nov-2007 19:22:43
20-Nov-2007 15:21:24
28-Nov-2007 19:22:43
20-Nov-2007 15:21:24
1-6)
.
displays the currently
48