Uploading And Upgrading - Crestron TPMC-4SM Installation & Operation Manual

Crestron TPMC-4SM

Uploading and Upgrading

Installation & Operations Guide – DOC. 6845F
Crestron recommends using the latest programming software and that each device
contains the latest firmware to take advantage of the most recently released features.
However, before attempting to upload or upgrade it is necessary to establish
communication. Once communication has been established, files (for example,
programs, projects or firmware) can be transferred to the control system (or device).
Finally, program checks can be performed (such as changing the device ID or
creating an IP table) to ensure proper functioning.
NOTE: Crestron software and any files on the website are for authorized Crestron
dealers and Crestron Service Providers (CSPs) only. New users must register to
obtain access to certain areas of the site (including the FTP site).
Establishing Communication
Use Crestron Toolbox software for communicating with the TPMC-4SM; refer to the
Crestron Toolbox software help file for details. There is a single method of
communication: TCP/IP communication.
Ethernet Communication
N
L A
PC R unning
C restron T oolbox
The TPMC-4SM connects to PC via Ethernet:
1. Use the Device Discovery Tool (click the
Discovery Tool) in Crestron Toolbox software to detect all Ethernet
devices on the network and their IP configuration. This tool is available in
Crestron Toolbox software version 1.15.143 or later.
2. Click on the TPMC-4SM to display information about the device.
4.3" Room Scheduling Touch Screen
Power
Injector
Po E
4
3
2
1
in k
U pl
itc
et Sw
he rn
h
er Et
er ov
Po w
5 C
O E- 48 VD
-S W -P
e r
C EN Po w
1 20 V olts
4.3" Room Scheduling Touch Screen: TPMC-4SM • 27
T PMC -4S M
E
P O
icon or select Tools > Device