Crankcase Disassembly - BRP E200HSLSEA Service Manual

POWERHEAD
POWERHEAD DISASSEMBLY

Crankcase Disassembly

Use the TAPER PIN TOOL, or equivalent, to push
the crankcase taper pins toward the front side of
the engine.
Do not use a tapered punch or
IMPORTANT:
any other tool that could jam in or damage the
taper bore when removing the pin.
1
1. Tool
2. Taper pin
Remove crankcase flange screws.
224
Remove the upper crankcase head screws.
2
Remove the lower crankcase head screws.
IMPORTANT:
retaining screws on the lower crankcase head.
49428
Loosen in stages, and remove the main bearing
screws and nuts.
004139
DO NOT remove the four inside
004140
004146
004136