Self-Timer Function - Tascam DR-40 Reference Manual

3 Use the + and − buttons to select the TONE VOL item
and press the ENTER/MARK or / button.
4 Use the + and − buttons to adjust the tone volume.
Options: −12dB, −18dB (default), −24dB, −30dB, −36dB
5 After completing the setting, press the
button to return to the Home Screen.

Self-timer function

Like a camera, the unit has a self-timer to trigger the start of
recording after a set period of time.
1 Press RECORD [0] button when stopped or playing
back to set the unit in recording standby, and press the
PB CONT button.
2 The self-timer icon
screen, and time is shown on the right.
Each time you press the PB CONT button, the setting
changes as follows:
OFF (default) q 5S (5 seconds) q 10S (10 seconds) q OFF
(HOME)[8]
appears in the recorder status
3 Set the time period, and press the RECORD[0] or PLAY
[7] button.
Recording will start after the set time period.
NOTE
• This function cannot be used when recording is paused in
the middle of recording.
• Self-timer function is not possible when using the AUTO
REC function.
Solo function
Press and hold the 1/2 [SOLO] or 3/4 [SOLO] button to enable
the solo function.
Use this in 4-channel mode and other cases when multiple
inputs are being recorded to monitor only one of the inputs.
You can check the solo status with the input source icons.
4 – Recording
61
TASCAM DR-40