Mixer - Tascam DR-40 Reference Manual

This recorder has a mixer function that allows you to set
the built-in effect, stereo balance and volume level for each
channel.
During mixdown (see "Mixdown" on page 86) and playback,
you can make fine adjustments to the recorded sound by
using this.
Making mixer settings
1 From the Home Screen, press the MIXER button to open
the MIXER screen.
During 4-channel file playback
During overdubbing (mix) mode
During 4-channel file playback (MS decoding of channels 3/4)
2 Use the . and
/
to move to and select the item that you want to adjust.
Each column is a channel and each row is a setting type.
3 Press the ENTER/MARK button to open the setting
name and value in a pop-up window at the top right.
4 Use the + and – buttons to change the setting value.
Item Setting range Operation details
Adjusts the send level of the selected
effect is used on the signal
SEND 0–100
(see "8 – Using the Effects" on page 87)
(0 (min.)–100 (max.))
PAN/ Adjusts left-right balance
L12–C–R12
BAL (L12 (left)–C (center)–R12 (right))
Volume level
LEV 0–100
(0 (min.)–100 (max.))
5 Press the ENTER/MARK button to return to the previous
screen where you can select the next setting that you
want to adjust.
NOTE
• The mixer can be used when recording, in recording
standby, playing back, paused or stopped.
9 – Mixer
buttons and the + and – buttons
TASCAM DR-40
89