Inserting And Removing Sd Cards; Card Write Protection - Tascam DR-40 Reference Manual

3 – Preparation

Inserting and removing SD cards

Inserting the SD card
NOTE
• An SD card is already installed when the unit is shipped
from the factory. If you want to use this card to record and
play tracks, there is no need to reinstall it.
• SD cards that meet SD, SDHC or SDXC standards can be
used with this unit.
• A list of SD cards that have been confirmed to work with
this unit can be found on our website (http://tascam.com/).
1 Open the SD slot cover on the right side panel.
2 Insert the SD Card into the slot as shown in the
following illustration until it clicks into place.
30
TASCAM DR-40
Removing the card
1 Open the SD slot cover on the right side panel.
2 Press the SD card in gently and then release it to allow it to come out.
CAUTION
Do not remove the SD card from the unit when it is connected
to a computer by USB.

Card write protection

SD cards have protect switches that prevent writing new data to them.
Writing possible Writing not possible