Set Where To Save The File - Tascam DR-40 Reference Manual

4 – Recording
3 Use the + or − button to select MONO or STEREO. (Default:
STEREO)
Mono recording
4 Press the . button to select the other item.
5 Use the + or − button to select SOURCE, and press the
ENTER/MARK or / button.
6 Use the + or − button to select the input source.
REC MODE SOURCE (options)
INT MIC MONO
(default)
MONO
EXT IN 1
INT MIC ST (default)
EXT IN 1/2
STEREO
EXT INDEP.
7 Press the . button to select the other item.
8 If REC MODE is set to STEREO, you can also set MS mic
decoding.
44
TASCAM DR-40
Stereo recording
Explanation
L/R signals of built-in mics
are mixed and recorded in
mono
L external input is
recorded in mono
Built-in mics are recorded
in stereo
External inputs are
recorded in stereo
Use two external
input channels with
independent level setting
When using MS mics, use the + and – buttons to select
the MS DECODE item, and press the ENTER/MARK or /
button.
Use the + and – buttons to set MS DECODE to ON.
9 Press the (HOME) [8] button to return to the
Home Screen.

Set where to save the file

Set the folder where recorded files are saved. The created
sound file will be saved in the currently selected folder. For
details, see SELECT popup menu under "Folder operations" on
page 66.
If no setting is made, new recording files are placed in the
MUSIC folder.
Starting the recording
1 Press the RECORD [0] button to begin recording
standby.
Mono Recording Stereo Recording