Start-Up & Shutdown - Tascam DR-40 Reference Manual

Start-up & shutdown
CAUTION
• The unit goes in standby mode if shut down when the unit
is operating on AC power supplied through the AC adapter
(TASCAM PS-P520E, sold separately), or bus power supplied
from a USB port of a PC.
• Turn down the volume of the sound system connected to
the unit before starting up or shutting down the unit.
• Do not use headphones when starting up or shutting down
the unit. Otherwise, a large noise would cause damage to
headphones or your ears.
Starting up the unit
To start up the unit from the stopped state, press and hold the
(HOME) [8] button until TASCAM DR-40 (start-up screen)
is displayed on the display. The Home Screen appears when
the unit starts up.
Start -Up Screen Home Screen
Selecting a language
The first time you turn a new unit on after purchase, the
following setting must be made.
A screen appears to set the language shown on the display.
Press the + or − button to move the cursor and select (highlight
with light letters on a black background) the language to be
shown on the display.
use English
English
:
use Japanese
日本語
:
use French
Français
:
use Spanish
Español
:
use German
Deutsch
:
use Italian
Italiano
:
use Russian
Русский
:
use Chinese
中文
:
After selection, press the ENTER/MARK button to confirm it.
NOTE
You can change this setting with the SYSTEM screen LANGUAGE
item. (See "Setting the language" on page 99.)
3 – Preparation
27
TASCAM DR-40