Setting The Phantom Power Voltage - Tascam DR-40 Reference Manual

Setting the phantom power voltage

Use the PHANTOM VOLT item to set the voltage of the phantom
power supplied when external mics that require it are
connected.
Options: +24V, +48V (factory setting)
Setting the language
Use the LANGUAGE item to set the language shown on the
display.
1. Use the + or − button to select the LANGUAGE item and
press the ENTER/MARK button.
Options
use English
ENG
:
use Japanese
日本語
:
use French
FRA
:
use Spanish
ESP
:
use German
DEU
:
use Italian
ITA
:
use Russian
RUS
:
use Chinese
中文
:
12 – Settings and Information
2. Press the ENTER/MARK button to open a pop-up
confirmation window.
3. Press the ENTER/MARK button to confirm the language
selection. To cancel language selection, press the ¤
(HOME) [8] button.
Restoring the factory settings
Use the INITIALIZE item to restore the various settings of this
unit to their factory settings.
1 Use the + or − button to select INITIALIZE, and press
the ENTER/MARK or / button to highlight Exec.
2 Press the ENTER/MARK button again to open a
confirmation pop-up window.
3 Press the ENTER/MARK button to initialize the unit.
Press (HOME) [8] to cancel initialization.
99
TASCAM DR-40