Tascam DR-40 Reference Manual page 49

5 Use the + and − buttons to set the external input(s)
used.
EXT IN (options) Meaning
EXT IN 1(default) Use one external input channel (L)
Use two external input channels
EXT INDEP.
with independent level setting
Use two external input channels
EXT IN 1/2
as a stereo pair
NOTE
• If the EXT IN item is set to EXT IN 1, two stereo files will be
created for it, but the EXT IN R channel will be silent.
• If the EXT IN item is set to EXT IN 1 and you want the EXT IN
L channel to be centered, press the MIXER button and set
the CH3 PAN to C (center).
• If the EXT IN item is set to EXT IN 1, the effect function will
be disabled during recording.
6 Press the . button to return to setting item
selection.
7 Use the + and − buttons to select the EXT L DLY item
and press the ENTRY/MARK or / button.
8 Use the + and − buttons to set the DELAY time for the
EXT L channel.
Range: -150ms (51m) - 0ms (0m) (default) - +150ms (51m)
9 Press the . button to highlight the item.
10 Use the + and − buttons to select the EXT R DLY item
and press the ENTRY/MARK or / button.
11 Use the + and − buttons to set the DELAY time for the
EXT R channel.
12 Press the . button to highlight the item.
13 When using a mid-side mic, use the + and − buttons to
select the MS DECODE item and press the ENTRY/MARK
or / button.
Use the + or − button to turn the MS DECODE item on.
14 When setting is complete, press the
button to return to the Home Screen.
4 – Recording
(HOME) [8]
49
TASCAM DR-40