Effects Preset List - Tascam DR-40 Reference Manual

8 – Using the Effects
When MIX is selected, you can set the level (SEND) of each
signal sent to the effect on the MIXER screen. (See "9 –
Mixer" on page 89.)
4 Use the + or – button to select the desired item and
press the ENTER/MARK button or
that item's settings.
5 Use the + or – button to set the desired value.
6 Press the . button when you are done making the
setting to return to item selection status.
7 Press the (HOME) [8] button to return to the Home
Screen.
NOTE
When the sampling frequency is set to 96 kHz, or a WAV file
with a sampling frequency of 96 kHz is played, the built-in
effects do not work.
However, you can still set the built-in effects.
88
TASCAM DR-40
button to access
/

Effects Preset List

Preset name Effects
This is a bright reverb modeled after a large
Hall 1 (default value)
hall-like space.
This is a warm reverb modeled after a large
Hall 2
hall-like space.
This reverb is modeled on a small indoor
Room
space.
Studio This reverb is modeled on a studio-like space.
Plate 1 This is a bright plate reverb.
Plate 2 This is a warm plate reverb.