Advertisement
1
Installation
Reverse the removal procedure noting the following
instruction.
• Install evaporator thermistor (evaporator temperature
sensor) (1) onto evaporator (2) as shown.
4
5
1
3. 50
5 mm (2
0.2 in.)
4. Sensor part fixed to 10th fin from the bottom
5. Holding part fixed to 8th fin from the bottom
Evaporator Thermistor (Evaporator
Temperature Sensor) Inspection
Check resistance between terminals of evaporator
thermistor (1).
If check results are as not specified, replace evaporator
thermistor.
Evaporator themistor resistance
0 C (32 F): 6.6 – 6.9 k
25 C (77 F): 1.9 – 2.3 k
I4RS0A720052-
2
3
I4RS0A720053-
S4RS0A7206014
Air Conditioning System:
[A]: Resistance (k )
[B]: Temperature
Expansion Valve Removal and Installation
Removal
1) Recover refrigerant from the A/C system with
recovery and recycling equipment referring to
"Recovery" in "Operation Procedure for Refrigerant
Charge: ".
2) Loosen a bolt (1) and remove pipes from expansion
valve (2).
3) Loosen bolts (3) and remove expansion valve.
I4RS0A720027-
S4RS0A7206015
1
3
2
2
I4RS0A720028-
7B-26
Advertisement
