Furuno FAR-3210 Installation Manual page 79

2.7.3 Installation in the power supply unit
Some parts or wiring may have been omitted from the illustrations of the power
supply unit for clarity.
1. Set the M_S switch on the converter to the M (Master) position.
2. Fasten the converter to its mounting bracket with four screws.
3. Loosen two screws on the BNC case. Attach the coaxial cable from the antenna
cable then close the case.
Loosen two
screws.
4. Fasten the BNC case to the mounting bracket with two screws.
TEST
M S
HMC-200CE-A
BNC
case
Fasten conductor
with screw.
Master/Slave
Coax/PLC
LAN PWR
Fasten shield
with clamp.
9 5 14
2. WIRING
2-51