Ip Parameters - Alvarion BreezeACCESS VL 5.4 System Manual

D-8

IP Parameters

MIB Parameter
*IpParams
(breezeAccessVLMib 4)
*UnitIpAddress
(*IpParams 1)
*SubNetMask
(*IpParams 2)
*DefaultGWAddress
(*IpParams 3)
*UseDhcp
(*IpParams 4)
*AccessToDHCP
(*IpParams 5)
*RunTimeIPaddr
(*IpParams 6)
*RunTimeSubNetMask
(*IpParams 7)
*RunTimeDefaultIPGateway
(*IpParams 8)
Bridge Parameters
MIB Parameter
*BridgeParameters
(breezeAccessVLMib 5)
*VLANSupport
(*BridgeParameters 1)
*VlanID
(*VLANSupport 1)
Description
Applicable to SU and AU. IP address of
the unit.
Applicable to SU and AU. Subnet mask of
the unit.
Applicable to SU and AU. Default
gateway IP address of the unit.
Applicable to SU and AU. DHCP client
mode of operation.
disable: Use regular (manual) methods to
configure IP parameters.
DHCP Only: Use DHCP server to
configure IP parameters.
automatic: Use DHCP server to configure
IP parameters. If a DHCP server is not
available, use manually configured values
for *UnitIpAdress, *SubnetMask and
*DefaultGWAdress.
Applicable to SU and AU. The port to be
used for communicating with a DHCP
server.
Applicable to SU and AU. Read-only: The
run-time IP address. If DHCP is used, the
run-time IP address is the address given to
the unit by the server. Alternatively the
static IP address is used.
Applicable to SU and AU. Read-only: The
run-time subnet mask. If DHCP is used,
the run-time subnet mask is the mask
given to the unit by the server.
Alternatively the static subnet mask value
is used.
Applicable to SU and AU. Read-only: The
run-time Gateway IP address. If DHCP is
used, the Run Time Gateway IP Address
is the address given to the unit by the
server. Alternatively, the static default
gateway is used.
Description
Bridge parameters.
Applicable to AU and SU. VLAN support
parameters. Applicable to Access Link only.
Applicable to SU only. VLAN ID for data
frame tagging.
BreezeACCESS VL System Manual
Values/Range
IP address
IP address
IP address
Integer
disable (1)
dHCPOnly (2)
automatic (3)
Integer
fromWirelessOnly (1)
fromEthernetOnly (2)
fromBothWirelessAndEthernet (3)
IP address
IP address
IP address
Values/Range
Integer
1-4094.
0 –na (no VLAN ID)