Alvarion BreezeACCESS VL 5.4 System Manual page 111

Operation and Administration
♦ Enable, which means that ARP messages are transmitted regardless of
the selected value of the Filter Options parameter.
The default selection is Enable.
Bridge Aging Time
The Bridge Aging Time parameter enables selecting the bridge aging time
for learned addresses of devices on both the wired and wireless sides, not
including BreezeACCESS VL units.
The available range is 100 to 2000 seconds.
The default value is 300 seconds.
Broadcast Relaying (AU only)
The Broadcast Relaying option enables selecting whether the unit performs
broadcast relaying. When the Broadcast Relaying parameter is enabled,
broadcast packets originating from devices on the wireless link are
transmitted by the AU back to the wireless link devices, as well as to the
wired LAN. If disabled, these packets are sent only to the local wired LAN
and are not sent back to the wireless link. Disable the broadcast relaying
only if all broadcast messages from the wireless link are certain to be
directed to the wired LAN.
The default selection is Enable.
Unicast Relaying (AU only)
The Unicast Relaying option enables selecting whether the unit performs
unicast relaying. When the Unicast Relaying parameter is enabled, unicast
packets originating from devices on the wireless link can be transmitted
back to the wireless link devices. If disabled, these packets are not sent to
the wireless link even if they are intended for devices on the wireless link.
Disable the Unicast Relaying parameter only if all unicast messages from
the wireless link are certain to be directed to the local wired LAN.
The default selection is Enable.
Show Bridge Parameters
The Show Bridge Parameters option displays the current values of the
Bridge parameters.
5-51