Alvarion BreezeACCESS VL 5.4 System Manual page 106

5-46
Show VLAN ID Forwarding List
The Show VLAN Forwarding List option displays the values of the VLAN
IDs included in the VLAN Forwarding List.
NOTE:
If the VLAN ID Forwarding List is empty and the VLAN Forwarding Support is set to
Enable, then all data frames are discarded.
VLAN Relaying (AU only)
The VLAN Relaying feature is applicable for Trunk Links only. It defining
the VLAN ID values to be included in the VLAN Relaying List. If the Link
Type is defined as Trunk Link and the VLAN Relaying Support option is
enabled, a frame relayed from the wireless link, which is a frame received
from the wireless link that should be transmitted back through the
wireless link, with a VLAN ID that is not a member of the unit's VLAN
Relaying List, is discarded. If VLAN Forwarding Support is also enabled, it
is necessary to configure all the VLAN IDs in the Relaying List also in the
Forwarding List to enable the relaying operation.
The VLAN Relaying menu provides the following options:
VLAN Relaying Support
The VLAN Relaying Support option enables or disables the VLAN Relaying
feature.
Available selections are Disable and Enable.
The default selection is Disable.
Add Relaying VLAN ID
The Add Relaying VLAN ID option enables adding a VLAN ID to the VLAN
Relaying List. One VLAN ID can be entered at a time. The maximum
number of VLAN IDs in the VLAN Relaying List is 20.
Valid values are 1 to 4094.
Remove Relaying VLAN ID
The Remove Relaying VLAN ID option enables removing a VLAN ID from
the VLAN ID Relaying List. Valid values are VID values (from 1 to 4094))
that are included in the VLAN Relaying List.
BreezeACCESS VL System Manual