Alvarion BreezeACCESS VL 5.4 System Manual page 135

Supported MIBs and Traps
MIB Parameter
*EthernetLinkType
(*VLANSupport 2)
*ManagementVID
(*VLANSupport 3)
*VLANForwarding
(*VLANSupport 4)
*VlanForwardingSupport
(*VLANForwarding 1)
*VlanForwardingTable
(*VLANForwarding 2)
*VlanForwardingEntry
(*VlanForwardingTable 1)
*VlanForwardingTableIdx
(*VlanForwardingEntry 1)
*VlanIdForwarding
(*VlanForwardingEntry 2)
*VLANRelaying
(*VLANSupport 5)
*VlanRelayingSupport
(*VLANRelaying 1)
*VlanRelayingTable
(*VLANRelaying 2)
*VlanRelayingEntry
(*VlanRelayingTable 1)
*VlanRelayingTableIdx
(*VlanRelayingEntry) 1
*VlanIdRelaying
(*VlanRelayingEntry 2)
*VLANTrafficPriority
(*VLANSupport 6)
Description
Applicable to AU and SU. VLAN support
mode (Link Type).
The accessLink option is not available for AU.
Applicable to AU and SU. VLAN ID for
management frame tagging.
VLAN forwarding feature parameters.
Applicable to AU and SU. Enables or disables
the VLAN forwarding feature. Applicable to
Trunk links only.
Applicable to AU and SU. A table of up to 20
VLAN IDs of devices to which data frames are
forwarded when the VLAN Forwarding feature
is Enabled. Applicable to Trunk links only. Not
accessible.
Applicable to AU and SU. A VLAN
Forwarding Table entry. Applicable to Trunk
links only. Not accessible.
Applicable to AU and SU. A read only table
index for a VLAN entry in the VLAN
Forwarding Table.
Applicable to AU and SU. The list of VLAN
ID's in the VLAN ID Forwarding Table. To
remove a VLAN ID - SET the corresponding
entry to 0. To add a new VLAN ID SET an
entry which is now 0.
VLAN Relaying feature parameters.
Applicable to AU only. Enables or disables the
VLAN Relaying feature. Applicable to Trunk
links only.
Applicable to AU only. A table of up to 20
VLAN IDs of devices to which data frames are
relayed when the VLAN Relaying feature is
Enabled. Applicable to Trunk links only. Not
accessible.
Applicable to AU only. A VLAN Relaying
Table entry. Applicable to Trunk links only.
Not accessible.
Applicable to AU only. A read only table index
for a VLAN entry in the VLAN Relaying
Table.
Applicable to AU only. The list of VLAN ID's
in the VLAN ID Relaying Table. To remove a
VLAN ID - SET the corresponding entry to 0.
To add a new VLAN ID SET an entry which is
now 0.
VLAN traffic priority parameters.
D-9
Values/Range
Integer
accessLink (1)
trunkLink (2)
hybridLink (3)
Integer
1-4094
65535 - no VLAN
tagging.
Integer
disable (1)
enable (2)
na (255)
Integer
1-20
Integer
1-4094
0-remove entry.
Integer
disable (1)
enable (2)
na (255)
Integer
1-20
Integer
1-4094
0-remove entry.