Garmin G1000 Pilot's Manual page 99

Create New Waypoint allows the pilot to create a new
user waypoint.
To create a new waypoint:
1. From the User Waypoint Information Page,
press the MENU key to display the User
Waypoint Information Page Options or press
the NEW softkey.
Turn the large FMS knob to highlight Create
2.
New Waypoint and press the ENT key.
3. Turn the small and large FMS knobs to enter
a name for the new waypoint and press the
ENT key. The message 'Are you sure you want
to create the new user waypoint' is displayed.
Press 'YES' to create the new waypoint. The
present position is displayed in the informa-
tion box. The first reference waypoint field is
highlighted
4. Turn the small and large FMS knobs to enter the
identifier of the reference waypoint. The refer-
ence waypoint can be an airport, VOR, NDB,
intersection or another user waypoint. Press
the ENT key to accept the selected identifier.
5. The cursor moves to the radial (RAD) field.Turn
the small and large FMS knobs to enter the
radial from the reference waypoint to the new
user waypoint. Press the ENT key to accept the
selected radial.
Press the FMS knob to remove the flashing
6.
cursor.
190-00381-03 Rev. A
Delete User Waypoint allows the pilot to delete a user
waypoint.
1.
2.
Rename User Waypoint allows the pilot to rename a
user waypoint.
1.
2.
3.
Garmin G1000 MFD Pilot's Guide for the DA40
WAYPOINT PAGE GROUP
To delete a user waypoint:
Select the User Waypoint Information Page
and press MENU to display the User Waypoint
Information Page Options or press the DELETE
softkey.
Turn the large FMS knob to select 'Delete User
Waypoint' and press the ENT key.The message
'Would you like to delete the user waypoint' is
displayed. Press 'YES' to delete the waypoint.
To rename a user waypoint:
Select the User Waypoint Information Page
and press MENU to display the User Waypoint
Information Page Options or press the RENAME
softkey.
Turn the large FMS knob to select 'Rename
User Waypoint' and press the ENT key.The user
waypoint field is highlighted.Turn the small and
large FMS knobs to rename the user waypoint.
Press the ENT key.
The message 'Would you like to rename the
user waypoint' is displayed. Press 'YES' to
rename the new user waypoint.
8-97