Garmin G1000 Pilot's Manual page 90

WAYPOINT PAGE GROUP
VOR Information Page Operations
The VOR information page allows the following
operations:
• VOR selection by identifier
• VOR selection by name
• VOR selection by closest city
The map range is adjustable by rotating the joystick.
To change the map range, rotate the joystick counter-
clockwise to select a lower range and rotate it clockwise to
select a higher range.
To select the VOR Information Page:
1. From any page, press and hold the CLR key to
select the Navigation Map Page. You may skip
this step if you are already viewing any of the
Map Group pages.
2. Turn the large FMS knob to select the 'WPT'
page group. 'WPT' is displayed in the page
group icon located in the lower right corner
of the display.
3. Turn the small FMS knob to select the VOR
Information Page.
To select a VOR by using an Identifier:
1. With the VOR Information Page displayed, press
the FMS knob to activate the cursor.
2. Turn the small and large FMS knobs to enter
a name for the identifier and press the ENT
key.
Press the FMS knob to remove the flashing
3.
cursor.
8-88
1.
2.
3.
4.
1.
2.
3.
4.
Garmin G1000 MFD Pilot's Guide for the DA40
To select a VOR by using a Name:
With the VOR Information Page displayed, press
the FMS knob to activate the cursor.
Turn the large FMS knobs to highlight the name
field
Turn the large and small FMS knobs to enter a
name and press the ENT key.
Press the FMS knob to remove the flashing
cursor.
To select a VOR by using the closest city:
With the VOR Information Page displayed, press
the FMS knob to activate the cursor.
Turn the large FMS knobs to highlight the clos-
est city field
Turn the large and small FMS knobs to enter
a city and press the ENT key.
Press the FMS knob to remove the flashing
cursor.
190-00381-03 Rev. A