Garmin G1000 Pilot's Manual page 54

FLIGHT PLANS
Load a Departure
'Load Departure' allows a published departure
procedure for the departure airport to be loaded into a
flight plan. It also replaces the current departure with a
new selection. When using a Direct-to, the G1000 uses
the nearest airport as a reference when displaying available
departures. A departure can also loaded using the PROC
key or by pressing the LD DP softkey.
Figure 8.6.8 Loading Departure Options
8-52
1.
2.
3.
4.
5.
6.
Garmin G1000 MFD Pilot's Guide for the DA40
To select a departure procedure for the
departure airport:
From the Active Flight Plan Page, press the
MENU key to display the Active Flight Plan Page
options.
Highlight 'Load Departure' from the list and
press the ENT key.
A window is displayed listing the available
departures for the departure airport. Turn
either the small or large FMS knob to select
the desired departure and press the ENT key.
A window may appear listing runways for the
departure.Turn the small or large FMS knob to
select the desired runway and press the ENT
key. This window is not displayed for every
departure.
A second window is displayed listing avail-
able transitions for the departure. Turn either
the small or large FMS knob to highlight the
desired transition waypoint and press the ENT
key.
With 'LOAD' highlighted, press the ENT key.
The departure flight plan is displayed as part
of the overall flight plan and is placed in front
of the enroute flight plan.
190-00381-03 Rev. A