Airport Information Page - Garmin G1000 Pilot's Manual

WAYPOINT PAGE GROUP
AIRPORT INFORMATION PAGE (INFO)
The Airport Information page shows the following
detailed information for the selected airport:
• Airport Information
• Runways
• Frequencies
Airport Information Page Operations
To enter a waypoint identifier:
1. Select the desired 'WPT' page and press the
FMS knob to activate the cursor.
2. Turn the small FMS knob to select the first
character of the waypoint's identifier.
Turn the large FMS knob to select the next
3.
character field.
4. Turn the small FMS knob to select the desired
character.
5. Repeat steps 3 and 4 until the identifier is
selected, then press the ENT key.
6. To remove the flashing cursor, press the FMS
knob.
8-72
Airports may be selected by identifier, facility name or
city location.
1.
2.
3.
4.
5.
6.
7.
Once the identifier, facility name or location is entered,
the airport information page displays information for the
selected airport. As you enter an identifier, facility name
or location, the "SpellNFind"™ feature scrolls through
the database, displaying those waypoints matching the
characters you have entered to that point. If duplicate
entries exist for the entered facility name or location,
additional entries may be viewed by continuing to turn
the small FMS knob during the selection process. If
duplicate entries exist for an entered identifier, a duplicate
waypoint page is displayed once you select the identifier
(by pressing the ENT key).
Garmin G1000 MFD Pilot's Guide for the DA40
To enter a waypoint facility name or city
location:
Select the Airport Information Page.
Press the FMS knob to activate the cursor.
Turn the large FMS knob to select the facility
name or location (city) field.
Turn the small FMS knob to select the desired
character.
Turn the large FMS knob to select the next
character field.
Repeat steps 4 and 5 until the facility name or
location is selected, then press the ENT key.
To remove the flashing cursor, press the FMS
knob.
190-00381-03 Rev. A